Dies
Attachment clip of bellmouth
Banding ring (transition)
Banding ring GT-500.03.003
Banding ring GT-500.03.003-01
Belt А1900Sh GOST 1284
Hit
Bolt GT-520.03.050-01
Bolt GT-520.03.050-01SB
Breaking pin GT-500.01.002-01
Bush (bronze) GT-520.04.014
Bush of breakin pin GT- 420.01.001
Bush of breakin pin GT-520.03.022
Central axis (with splines)
Central axis assembled Munch 520
Central axis GT- 630DА.03.121 modernized
Central axis GT-520D.03.020
Central shaft GT-630 assembled with consoles
Central shaft GT-630.03.020
Charging chute (with forced loading)
Charging chute (without forced loading)
Collet sleeve MN 021.05.02.02.001
Console base GT-420.01.002
Console GT-630 DA.03.028 modernized
Die from alloyed steel 406/120х10,0х55/55
Die from alloyed steel 500/116х10,0х60/60
Die from stainless steel 1000/253х8,0х100/85
Die from stainless steel 1000/253х8,0х95/77
Die from stainless steel 1000/255х10,0х94/74
Die from stainless steel 1000/255х8,0х80/55
Die from stainless steel 1000/303х8,0х90/70
Die from stainless steel 292/102х7,5х70/70
Die from stainless steel 300/50х6,0х60/40
Die from stainless steel 300/50х6,0х75/50
Die from stainless steel 304/55х6,0х54/54Hit
Die from stainless steel 304/55х6,0х60/30
Die from stainless steel 304/55х6,0х65/43
Die from stainless steel 304/55х6,0х66/22
Die from stainless steel 304/55х6,0х72/72
Die from stainless steel 304/55х6,0х75/22
Die from stainless steel 304/55х6,0х75/22
Die from stainless steel 304/55х6,0х75/23
Die from stainless steel 304/55х6,0х75/30
Die from stainless steel 304/55х6,0х75/32
Die from stainless steel 304/55х6,0х75/35
Die from stainless steel 304/55х6,0х75/38
Die from stainless steel 304/55х6,0х75/40
Die from stainless steel 304/55х8,0х72/72
Die from stainless steel 304/55х8,0х75/40
Die from stainless steel 304/55х8,0х75/42
Die from stainless steel 304/55х8,0х75/46
Die from stainless steel 304/55х8,0х75/48
Die from stainless steel 304/55х8,0х75/53
Die from stainless steel 304/55х8,0х75/58
Die from stainless steel 304/55х8,0х85/85
Die from stainless steel 304/65х8,0х85/85
Die from stainless steel 304/78х2,0х40/20
Die from stainless steel 304/78х2,0х50/25
Die from stainless steel 304/78х2,5х50/25
Die from stainless steel 304/78х3,2х45/45
Die from stainless steel 304/78х3,2х50/35
Die from stainless steel 304/78х4,0х50/43
Die from stainless steel 304/78х4,0х50/50
Die from stainless steel 304/78х4,8х50/50
Die from stainless steel 304/78х4,8х60/60
Die from stainless steel 304/78х5,0х60/60
Die from stainless steel 304/78х6,0х60/60
Die from stainless steel 304/78х6,0х65/65
Die from stainless steel 304/78х6,0х75/40
Die from stainless steel 304/99х8,0х75/55
Die from stainless steel 304х6,0
Die from stainless steel 305/78х8,0
Die from stainless steel 310/56х6,0х50/38
Die from stainless steel 310/56х6,0х50/50
Die from stainless steel 310/98х4,0х45/45
Die from stainless steel 310/98х4,0х50/50
Die from stainless steel 310/98х6,0х65/65
Die from stainless steel 310/98х8,0х75/53
Die from stainless steel 310/98х8,0х85/85
Die from stainless steel 350/70х6,0х65/25
Die from stainless steel 350/78х6,0х60/55
Die from stainless steel 350/78х6,0х75/30
Die from stainless steel 350/78х6,0х75/32
Die from stainless steel 350/78х6,0х75/35
Die from stainless steel 350/78х6,0х75/38
Die from stainless steel 350/78х6,0х75/40
Die from stainless steel 350/78х8,0х75/40
Die from stainless steel 350/78х8,0х75/42
Die from stainless steel 350/78х8,0х75/46
Die from stainless steel 350/78х8,0х75/50
Die from stainless steel 350/78х8,0х75/53
Die from stainless steel 350/78х8,0х85/85
Die from stainless steel 350/98х3,2х50/35
Die from stainless steel 350/98х4,5х55/55
Die from stainless steel 350/98х4,8х60/60
Die from stainless steel 350/99х10,0х65/65
Die from stainless steel 350/99х10,0х70/70
Die from stainless steel 350/99х12,0х70/70
Die from stainless steel 350/99х2,0х40/20
Die from stainless steel 350/99х2,0х50/25
Die from stainless steel 350/99х2,5х50/25
Die from stainless steel 350/99х3,2х45/45
Die from stainless steel 350/99х3,2х50/35
Die from stainless steel 350/99х3,2х50/45
Die from stainless steel 350/99х4,0х50/43
Die from stainless steel 350/99х4,0х50/50
Die from stainless steel 350/99х4,0х60/45
Die from stainless steel 350/99х4,0х60/48
Die from stainless steel 350/99х4,0х65/65
Die from stainless steel 350/99х4,5х55/55
Die from stainless steel 350/99х4,8х60/60
Die from stainless steel 350/99х5,0х60/60
Die from stainless steel 350/99х5,0х65/65
Die from stainless steel 350/99х6,0х60/40
Die from stainless steel 350/99х6,0х60/60
Die from stainless steel 350/99х6,0х65/65
Die from stainless steel 350/99х6,0х72/72
Die from stainless steel 350/99х7,5х70/70
Die from stainless steel 350/99х8,0х52/35
Die from stainless steel 350/99х8,0х60/35
Die from stainless steel 350/99х8,0х65/65
Die from stainless steel 350/99х8,0х75/48
Die from stainless steel 350/99х8,0х75/75
Die from stainless steel 350/99х8,0х85/85
Die from stainless steel 360/166х4,0х52/52
Die from stainless steel 360/166х4,8х60/60
Die from stainless steel 400/64х6,0х60/22
Die from stainless steel 400/64х6,0х60/24
Die from stainless steel 406/118х12,0х70/70
Die from stainless steel 406/120х10,0х60/60
Die from stainless steel 406/120х10,0х65/65
Die from stainless steel 406/120х10,0х70/70
Die from stainless steel 406/120х12,0х100/100
Die from stainless steel 406/120х12,0х75/75
Die from stainless steel 406/120х12,0х77/77
Die from stainless steel 406/120х2,0х40/20
Die from stainless steel 406/120х2,0х50/25
Die from stainless steel 406/120х2,5х50/25
Die from stainless steel 406/120х3,2х45/45
Die from stainless steel 406/120х3,2х50/35
Die from stainless steel 406/120х3,2х50/35 1 PAZ
Die from stainless steel 406/120х3,2х55/55
Die from stainless steel 406/120х3,2х60/40
Die from stainless steel 406/120х3,5х42/42
Die from stainless steel 406/120х3,5х45/45
Die from stainless steel 406/120х3,5х50/35
Die from stainless steel 406/120х3,5х50/40
Die from stainless steel 406/120х3,5х60/45
Die from stainless steel 406/120х4,0х45/45
Die from stainless steel 406/120х4,0х50/43
Die from stainless steel 406/120х4,0х50/50
Die from stainless steel 406/120х4,0х50/50 1 PAZ
Die from stainless steel 406/120х4,5х50/50
Die from stainless steel 406/120х4,8х60/60
Die from stainless steel 406/120х5,0х60/60
Die from stainless steel 406/120х6,0х60/60
Die from stainless steel 406/120х6,0х65/65
Die from stainless steel 406/120х6,0х67/67
Die from stainless steel 406/120х6,0х72/72
Die from stainless steel 406/120х7,0х70/70
Die from stainless steel 406/120х7,5х65/65
Die from stainless steel 406/120х7,5х70/70
Die from stainless steel 406/120х8,0х65/65
Die from stainless steel 406/120х8,0х80/80
Die from stainless steel 406/120х8,0х85/85
Die from stainless steel 406/78х6,0х75/30
Die from stainless steel 406/78х6,0х75/32
Die from stainless steel 406/78х6,0х75/35
Die from stainless steel 406/78х6,0х75/38
Die from stainless steel 406/78х6,0х75/40
Die from stainless steel 406/78х8,0х75/40
Die from stainless steel 406/78х8,0х75/42
Die from stainless steel 406/78х8,0х75/46
Die from stainless steel 406/78х8,0х75/48
Die from stainless steel 406/78х8,0х75/53
Die from stainless steel 407/113х6,0х50/50
Die from stainless steel 407/120х8,0х60/60
Die from stainless steel 408/116х10,0х65/65
Die from stainless steel 408/116х10,0х70/70
Die from stainless steel 408/116х2,5х50/25
Die from stainless steel 408/116х3,2х45/45
Die from stainless steel 408/116х3,2х50/35
Die from stainless steel 408/116х3,5х50/40
Die from stainless steel 408/116х4,0х45/45
Die from stainless steel 408/116х4,0х50/43
Die from stainless steel 408/116х4,0х50/50
Die from stainless steel 408/116х4,5х50/50
Die from stainless steel 408/116х4,8х60/60
Die from stainless steel 408/116х5,0х60/60
Die from stainless steel 408/116х6,0х60/60
Die from stainless steel 408/116х6,0х65/65
Die from stainless steel 408/116х6,0х72/72
Die from stainless steel 408/116х8,0х65/65
Die from stainless steel 408/116х8,0х85/85
Die from stainless steel 408/45х8,0х80/80
Die from stainless steel 408/45х8,0х85/85
Die from stainless steel 408/84х6,0х75/30
Die from stainless steel 408/84х6,0х75/32
Die from stainless steel 408/84х6,0х75/35
Die from stainless steel 408/84х6,0х75/38
Die from stainless steel 408/84х6,0х75/40
Die from stainless steel 408/84х8,0х75/40
Die from stainless steel 408/84х8,0х75/42
Die from stainless steel 408/84х8,0х75/46
Die from stainless steel 408/84х8,0х75/48
Die from stainless steel 408/84х8,0х75/53
Die from stainless steel 420/109х4,8х60/60
Hit
Die from stainless steel 420/113х2,5х50/25
Hit
Die from stainless steel 420/113х3,2х50/50
Hit
Die from stainless steel 420/113х4,0х50/50
Hit
Die from stainless steel 420/113х4,0х55/55
Hit
Die from stainless steel 420/113х4,5х55/55
Hit
Die from stainless steel 420/116х10,0х65/65
Hit
Die from stainless steel 420/116х2,0х40/20
Hit
Die from stainless steel 420/116х2,0х50/25
Hit
Die from stainless steel 420/116х2,5х50/25
Hit
Die from stainless steel 420/116х3,2х45/45
Die from stainless steel 420/116х3,2х50/35
Hit
Die from stainless steel 420/116х3,5х45/45
Hit
Die from stainless steel 420/116х4,0х50/43
Die from stainless steel 420/116х4,0х50/50
Die from stainless steel 420/116х4,5х50/50
Hit
Die from stainless steel 420/116х4,8х60/60
Die from stainless steel 420/116х5,0х60/60
Die from stainless steel 420/116х6,0х60/60
Die from stainless steel 420/116х6,0х65/65
Die from stainless steel 420/116х7,5х70/70
Hit
Die from stainless steel 420/116х8,0х65/65
Die from stainless steel 420/116х8,0х70/70
Die from stainless steel 420/130х3,2х50/50
Hit
Die from stainless steel 420/140х8,5х60/60
Die from stainless steel 420/142х6,0х80/80
Hit
Die from stainless steel 420/80х8,0х80/80
Hit
Die from stainless steel 420/80х8,0х85/85
Die from stainless steel 420/85х8,0х75/53
Die from stainless steel 420/88х8,0х75/53
Hit
Die from stainless steel 480/122х10,0х65/65
Die from stainless steel 480/122х10,0х70/70
Die from stainless steel 480/122х2,0х40/20
Die from stainless steel 480/122х2,0х50/25
Die from stainless steel 480/122х2,0х50/25
Die from stainless steel 480/122х2,5х50/25
Die from stainless steel 480/122х2,5х50/35
Die from stainless steel 480/122х3,2х45/45
Die from stainless steel 480/122х3,2х50/35
Die from stainless steel 480/122х3,2х60/50
Die from stainless steel 480/122х3,5х45/45
Die from stainless steel 480/122х3,5х45/45
Die from stainless steel 480/122х4,0х50/43
Die from stainless steel 480/122х4,0х50/50
Die from stainless steel 480/122х4,0х50/8
Die from stainless steel 480/122х4,0х60/45
Die from stainless steel 480/122х4,5х55/55
Die from stainless steel 480/122х4,8х60/60
Die from stainless steel 480/122х5,0х60/60
Die from stainless steel 480/122х6,0х60/14
Hit
Die from stainless steel 480/122х6,0х65/55
Die from stainless steel 480/122х6,0х65/65
Hit
Die from stainless steel 480/122х6,0х72/72
Hit
Die from stainless steel 480/122х6,0х75/20
Hit
Die from stainless steel 480/122х6,0х80/80
Hit
Die from stainless steel 480/122х8,0х65/65
Die from stainless steel 480/122х8,0х85/85
Die from stainless steel 480/122х8,0х90/90
Die from stainless steel 480/78х6,0х75/28
Hit
Die from stainless steel 480/78х6,0х75/30
Hit
Die from stainless steel 480/78х6,0х75/32
Die from stainless steel 480/78х6,0х75/35
Hit
Die from stainless steel 480/78х6,0х75/38
Die from stainless steel 480/78х6,0х75/39
Hit
Die from stainless steel 480/78х6,0х75/40
Hit
Die from stainless steel 480/78х6,0х75/42
Die from stainless steel 480/78х6,0х75/42
Die from stainless steel 480/78х6,0х75/50
Die from stainless steel 480/78х8,0х75/40
Die from stainless steel 480/78х8,0х75/42
Die from stainless steel 480/78х8,0х75/46
Die from stainless steel 480/78х8,0х75/48
Die from stainless steel 480/78х8,0х75/53
Die from stainless steel 480/78х8,0х75/53
Die from stainless steel 480/78х8,0х75/55
Die from stainless steel 480/78х8,0х85/85
Die from stainless steel 480/85х8,0х75/53
Die from stainless steel 500/116x10,0x70/70
Die from stainless steel 500/116х10,0х65/65
Die from stainless steel 500/116х10,0х95/95
Die from stainless steel 500/116х2,0х50/25
Die from stainless steel 500/116х2,5х50/25
Die from stainless steel 500/116х3,2
Hit
Die from stainless steel 500/116х3,2х50/35
Die from stainless steel 500/116х3,2х52/52
Die from stainless steel 500/116х3,5х45/45
Die from stainless steel 500/116х3,5х50/50
Die from stainless steel 500/116х4,0х45/45
Die from stainless steel 500/116х4,0х45/45
Die from stainless steel 500/116х4,0х60/60
Die from stainless steel 500/116х4,5х50/50
Die from stainless steel 500/116х4,8х50/50
Die from stainless steel 500/116х4,8х60/60
Die from stainless steel 500/116х5,0х50/50
Die from stainless steel 500/116х5,0х50/50
Die from stainless steel 500/116х5,0х60/60
Die from stainless steel 500/116х6,0х60/60
Die from stainless steel 500/116х6,0х72/72
Die from stainless steel 500/116х6,0х75/30
Die from stainless steel 500/116х6,0х75/32
Die from stainless steel 500/116х6,0х75/35
Die from stainless steel 500/116х6,0х75/38
Die from stainless steel 500/116х6,0х75/40
Die from stainless steel 500/116х7,0х70/70
Die from stainless steel 500/116х7,5х65/65
Die from stainless steel 500/116х7,5х70/70
Die from stainless steel 500/116х8,0х55/55
Die from stainless steel 500/116х8,0х65/65
Die from stainless steel 500/116х8,0х65/65
Die from stainless steel 500/116х8,0х75/40
Die from stainless steel 500/116х8,0х75/42
Die from stainless steel 500/116х8,0х75/46
Die from stainless steel 500/116х8,0х75/48
Die from stainless steel 500/116х8,0х75/53
Die from stainless steel 500/116х8,0х75/58
Die from stainless steel 500/116х8,0х75/60
Die from stainless steel 500/116х8,0х75/65
Die from stainless steel 500/116х8,0х75/75
Die from stainless steel 500/116х8,0х75/75
Die from stainless steel 500/116х8,0х85/58
Die from stainless steel 500/116х8,0х85/85
Die from stainless steel 500/116х8,0х88/88
Die from stainless steel 500/116х8,5х50/50
Die from stainless steel 500/96х6,0х54/54
Die from stainless steel 500/96х6,0х65/43
Die from stainless steel 500/96х6,0х75/40
Die from stainless steel 500/96х6,0х75/75
Hit
Die from stainless steel 500/96х8,0х72/72
Die from stainless steel 500/96х8,0х75/56
Die from stainless steel 500/96х8,0х75/58
Die from stainless steel 506/78х6,0х75/42
Die from stainless steel 508/153х10,0х65/65
Die from stainless steel 508/153х8,0х65/65
Die from stainless steel 508/156х3,0х75/70
Die from stainless steel 520/100х6,0х54/54
Die from stainless steel 520/100х6,0х65/55
Die from stainless steel 520/100х6,0х75/43
Die from stainless steel 520/100х6,0х75/44
Die from stainless steel 520/100х6,0х75/55
Die from stainless steel 520/100х6,0х75/75
Die from stainless steel 520/100х8,0х100/100
Die from stainless steel 520/100х8,0х72/72
Die from stainless steel 520/100х8,0х75/54
Die from stainless steel 520/100х8,0х75/57
Die from stainless steel 520/100х8,0х75/58
Die from stainless steel 520/100х8,0х75/60
Die from stainless steel 520/100х8,0х75/75
Die from stainless steel 520/100х8,0х90/90
Die from stainless steel 520/110х7,5х90/90
Die from stainless steel 520/138х10,0х65/65
Die from stainless steel 520/138х10,0х80/80
Die from stainless steel 520/138х6,0х72/72
Die from stainless steel 520/138х6,0х75/30
Die from stainless steel 520/138х6,0х75/32
Die from stainless steel 520/138х6,0х75/35
Die from stainless steel 520/138х6,0х75/38
Die from stainless steel 520/138х6,0х75/40
Die from stainless steel 520/138х6,0х75/42
Hit
Die from stainless steel 520/138х6,0х75/43
Die from stainless steel 520/138х7,5х70/70
Die from stainless steel 520/138х8,0х65/65
Die from stainless steel 520/138х8,0х70/70
Die from stainless steel 520/138х8,0х75/40
Die from stainless steel 520/138х8,0х75/42
Die from stainless steel 520/138х8,0х75/46
Die from stainless steel 520/138х8,0х75/48
Die from stainless steel 520/138х8,0х75/53
Die from stainless steel 520/138х8,0х75/57
Die from stainless steel 520/138х8,0х75/75
Die from stainless steel 520/138х8,0х85/85
Die from stainless steel 520/138х8,0х90/90
Die from stainless steel 520/138х8,0х95/95
Die from stainless steel 520/142х3,2х45/45
Die from stainless steel 520/142х4,8х50/50
Die from stainless steel 520/142х4,8х60/60
Die from stainless steel 520/165х8,0х80/80
Die from stainless steel 520/178х10,0х65/65
Die from stainless steel 520/178х2,0х50/25
Die from stainless steel 520/178х2,5х50/25
Die from stainless steel 520/178х3,2х45/45
Die from stainless steel 520/178х3,5х50/35
Die from stainless steel 520/178х4,0х50/50
Die from stainless steel 520/178х4,5х55/55
Die from stainless steel 520/178х4,8х60/60
Die from stainless steel 520/178х4,8х65/65 Н
Die from stainless steel 520/178х5,0х60/60
Die from stainless steel 520/178х6,0х65/65
Die from stainless steel 520/178х7,5х70/70
Die from stainless steel 520/178х8,0х65/65
Die from stainless steel 520/178х8,0х65/65
Die from stainless steel 520/178х8,0х70/70
Die from stainless steel 520/80х6,0х75/40
Die from stainless steel 520/80х6,0х75/42
Die from stainless steel 520/80х8,0х75/54
Die from stainless steel 520/85х7,5х90/90
Die from stainless steel 520/85х8,0х75/63
Die from stainless steel 585/124х8,0х84/50
Die from stainless steel 600/225х2,2х65/25
Die from stainless steel 630/128х6,0х75/43
Die from stainless steel 630/128х6,0х75/54
Die from stainless steel 630/128х8,0х72/72
Die from stainless steel 630/128х8,0х75/58
Die from stainless steel 630/148х10,0х70/70
Die from stainless steel 630/148х12,0х70/70
Die from stainless steel 630/148х6,0х72/72
Die from stainless steel 630/148х6,0х72/72
Die from stainless steel 630/148х6,0х75/30
Die from stainless steel 630/148х6,0х75/32
Die from stainless steel 630/148х6,0х75/35
Die from stainless steel 630/148х6,0х75/38
Die from stainless steel 630/148х6,0х75/40
Die from stainless steel 630/148х8,0х60/60
Die from stainless steel 630/148х8,0х65/65
Die from stainless steel 630/148х8,0х70/70
Hit
Die from stainless steel 630/148х8,0х75/40
Die from stainless steel 630/148х8,0х75/42
Die from stainless steel 630/148х8,0х75/46
Die from stainless steel 630/148х8,0х75/48
Die from stainless steel 630/148х8,0х75/53
Die from stainless steel 630/148х8,0х75/53
Die from stainless steel 630/148х8,0х75/75
Die from stainless steel 630/148х8,0х85/85
Die from stainless steel 630/148х8,0х88/88
Die from stainless steel 630/200х10,0х65/65
Die from stainless steel 630/200х10,0х70/70
Die from stainless steel 630/200х2,0х40/20
Die from stainless steel 630/200х2,0х50/25
Die from stainless steel 630/200х2,5х50/25
Die from stainless steel 630/200х3,2х45/45
Die from stainless steel 630/200х3,2х50/35
Die from stainless steel 630/200х3,2х55/55
Die from stainless steel 630/200х3,5х50/40
Die from stainless steel 630/200х4,0х45/45
Die from stainless steel 630/200х4,0х50/50
Die from stainless steel 630/200х4,5х50/50
Die from stainless steel 630/200х4,5х55/55
Die from stainless steel 630/200х4,8х60/60
Die from stainless steel 630/200х5,0х60/60
Die from stainless steel 630/200х6,0х58/40
Die from stainless steel 630/200х6,0х65/40
Die from stainless steel 630/200х6,0х65/65
Die from stainless steel 630/200х8,0х65/65
Die from stainless steel 660/148х8,0х85/85
Die from stainless steel 660/228х10,0х60/60
Die from stainless steel 750/250х12,0х100/100
Die from stainless steel 750/250х12,0х84/84
Die from stainless steel 750/250х3,2х50/50
Die from stainless steel 750/250х3,5х50/50
Die from stainless steel 750/250х3,5х55/55
Die from stainless steel 750/250х4,0х55/55
Die from stainless steel 750/250х4,0х60/60
Die from stainless steel 800/106х6,0х100/55
Die from stainless steel 800/112х8,0х98,5/75
Die from stainless steel 800/112х8,0х98,5/75
Die from stainless steel 800/150х6,0х85/42
Die from stainless steel 800/190х8,0х85/85
Hit
Die from stainless steel 826/116х8,0х100/100
Die from stainless steel 826/116х8,0х125/85
Die from stainless steel 826/120х8,0х100/100
Die from stainless steel 850/129х8,0х100/90
Die from stainless steel 850/129х8,0х90/90
Die from stainless steel 912/252х4,0х70/45
Die from stainless steel 912/252х5,0х70/60
Distance ring GT-500.10.012
External labyrinth 352106506
Faceplate Munch-520.03.018
Faceplate Munch-520.03.018
Faceplate Munch-630.03.018-01
Fixture set GT-630DA.03.130 modernized
Flange bush GT-420М.03.040
Front plate GT -500.03.060
Gear shaft B6 DGV Z=22 teeth
Hold-down plate 410.3.5606
Internal labyrinth 352106505
Novelty Hit
Labyrinth GT-206.120/120.150.003
Labyrinth GT-520.03.010
Labyrinth GT-520.03.083
Labyrinth packing GT-500M.03.017
Labyrinth packing GT-500M.03.018
Lubrication pipe GT- -500М.10.060 R
Lubrication pipe GT- -500М.10.09 SB
Packing ring body GT-500М
Packing ring body GT-500М.03.021
Plate GT-630 DA.03.160 modernized
Pressure breakdown labyrinth
Replaceable ring GT-520.03.015
Roller adjusting arm (with toothed sleeve OGM-1,5.03.201)
Roller adjusting arm (without toothed sleeve OGM-0,8.01.003)
Roller adjusting arm GT-420.03.070
Roller adjusting arm GT-520.03.001
Roller adjusting arm GT-520.03.002
Roller adjusting arm GT-630.03.001
Roller assembled SB 184/120N
Roller block console GT-420
Hit
Roller block console GT-500.10.114
Roller block console GT-520
Roller block console GT-520 reinforced
Roller holder group MN 030.07.00.00.000
Roller SB 140/100 K (oblique cutting)
Roller SB 140/100 N (rifled)
Roller SB 140/100 P (perfarated)
Roller SB 140/80 K (oblique cutting)
Roller SB 140/80 N (rifled)
Roller SB 140/80 P (perfarated)
Roller SB 142/55 K (oblique cutting)
Roller SB 142/55 K (oblique cutting)
Roller SB 142/55 K (oblique cutting), bearings SKF
Roller SB 142/55 K (oblique cutting), bearings SKF
Roller SB 142/55 N (rifled)
Roller SB 142/55 N (rifled), bearings SKF
Roller SB 142/55 P (perfarated)
Roller SB 142/55 P (perfarated)
Roller SB 142/55 P (perfarated), bearings SKF
Roller SB 142/55 P (perfarated), bearings SKF
Roller SB 142/58 K (oblique cutting)
Roller SB 142/58 K (oblique cutting), bearings SKF
Roller SB 142/58 N (rifled)
Roller SB 142/58 N (rifled), bearings SKF
Roller SB 142/58 P (perfarated)
Roller SB 142/58 P (perfarated), bearings SKF
Roller SB 142/82 K (oblique cutting)
Roller SB 142/82 K (oblique cutting), bearings SKF
Roller SB 142/82 N (rifled)
Roller SB 142/82 N (rifled), bearings SKF
Roller SB 142/82 P (perfarated)
Roller SB 142/82 P (perfarated)
Roller SB 142/82 P (perfarated), bearings SKF
Roller SB 142/82 P (perfarated), bearings SKF
Roller SB 146/100 P (perfarated)
Roller SB 180/120 K (oblique cutting)
Roller SB 180/120 N (rifled)
Roller SB 180/120 P (perfarated)
Roller SB 180/80 K (oblique cutting)
Roller SB 180/80 N (rifled)
Roller SB 180/80 P (perfarated)
Roller SB 190/122 K (oblique cutting)
Roller SB 190/122 N (rifled)
Hit
Roller SB 190/122 P (perfarated)
Hit
Roller SB 190/122 P (perfarated)
Hit
Roller SB 190/80 K (oblique cutting)
Hit
Roller SB 190/80 N (rifled)
Hit
Roller SB 190/80 P (perfarated)
Hit
Roller SB 194/122 K (oblique cutting)
Roller SB 194/122 N (rifled)
Roller SB 194/122 P (perfarated)
Roller SB 194/122 P (perfarated)
Roller SB 194/180 N (rifled)
Roller SB 194/80 K (oblique cutting)
Roller SB 194/80 P (perfarated)
Roller SB 206/120 K (oblique cutting)
Roller SB 206/120 K (oblique cutting), bearings SKF
Roller SB 206/120 N (rifled)
Roller SB 206/120 N (rifled), bearings SKF
Roller SB 206/120 P (perfarated)
Roller SB 206/120 P (perfarated), bearings SKF
Roller SB 206/142 N (rifled)
Roller SB 220/120 K (oblique cutting)
Roller SB 220/120 N (rifled)
Roller SB 220/120 P (perfarated)
Roller SB 240/100 K (oblique cutting)
Roller SB 240/100 K (oblique cutting), bearings SKF
Roller SB 240/100 N (rifled)
Roller SB 240/100 N (rifled), bearings SKF
Roller SB 240/100 P (perfarated)
Roller SB 240/100 P (perfarated), bearings SKF
Roller SB 240/120 K (oblique cutting)
Roller SB 240/120 K (oblique cutting), bearings SKF
Roller SB 240/120 N (rifled)
Roller SB 240/120 N (rifled), bearings SKF
Roller SB 240/120 P (perfarated)
Roller SB 240/120 P (perfarated), bearings SKF
Roller SB 250/100 N (rifled)
Roller SB 250/106 N (rifled)
Roller SB 250/110 K (oblique cutting)
Roller SB 250/110 K (oblique cutting), bearings SKF
Roller SB 250/110 N (rifled)
Roller SB 250/110 N (rifled), bearings SKF
Roller SB 250/110 P (perfarated)
Roller SB 250/110 P (perfarated), bearings SKF
Roller SB 250/120 N (rifled)
Roller SB 250/120 P (perfarated)
Roller SB 250/144 K (oblique cutting)
Roller SB 250/144 K (oblique cutting), bearings SKF
Roller SB 250/144 N (rifled)
Roller SB 250/144 N (rifled), bearings SKF
Roller SB 250/144 P (perfarated)
Roller SB 250/144 P (perfarated), bearings SKF
Roller SB 250/184 K (oblique cutting)
Roller SB 250/184 K (oblique cutting), bearings SKF
Roller SB 250/184 N (rifled)
Roller SB 250/184 N (rifled), bearings SKF
Roller SB 250/184 P (perfarated)
Roller SB 250/184 P (perfarated), bearings SKF
Roller SB 310/134 K (oblique cutting)
Roller SB 310/134 K (oblique cutting), bearings SKF
Roller SB 310/134 N (rifled)
Roller SB 310/134 N (rifled), bearings SKF
Roller SB 310/134 P (perfarated)
Roller SB 310/154 K (oblique cutting)
Roller SB 310/154 K (oblique cutting), bearings SKF
Roller SB 310/154 N (rifled), bearings SKF
Roller SB 310/154 P (perfarated)
Roller SB 310/154 P (perfarated), bearings SKF
Roller SB 310/206 K (oblique cutting)
Roller SB 310/206 K (oblique cutting), bearings SKF
Roller SB 310/206 N (rifled)
Roller SB 310/206 N (rifled), bearings SKF
Roller SB 310/206 P (perfarated)
Roller SB 310/206 P (perfarated), bearings SKF
Roller SB 3100/134 P (perfarated), bearings SKF
Roller SB 3100/154 N (rifled)
Roller SB 318/234 N (rifled)
Roller SB 390/195 N (rifled)
Roller SB 390/195 N (rifled), bearings SKF
Roller SB 395/116 N (without bearings)
Roller shell OB 140/100 K (oblique cutting)
Roller shell OB 140/100 K (oblique cutting)
Roller shell OB 140/100 N (rifled)
Roller shell OB 140/100 N (rifled)
Roller shell OB 140/100 P (perforated)
Roller shell OB 140/100 P (perforated)
Roller shell OB 140/100 P (perforated)
Roller shell OB 140/57 N (rifled)
Roller shell OB 140/57 N (rifled)
Roller shell OB 140/60 N (rifled)
Roller shell OB 140/80 K (oblique cutting)
Roller shell OB 140/80 K (oblique cutting)
Roller shell OB 140/80 N (rifled)
Roller shell OB 140/80 N (rifled)
Roller shell OB 140/80 P (perforated)
Roller shell OB 140/80 P (perforated)
Roller shell OB 142/55 K (oblique cutting)
Roller shell OB 142/55 N (rifled)
Roller shell OB 142/55 P (perforated)
Roller shell OB 142/58 K (oblique cutting)
Roller shell OB 142/58 N (rifled)
Roller shell OB 142/58 P (perforated)
Roller shell OB 142/82 K (oblique cutting)
Roller shell OB 142/82 N (rifled)
Roller shell OB 142/82 P (perforated)
Roller shell OB 146/100 K (oblique cutting)
Roller shell OB 146/100 K (oblique cutting)
Roller shell OB 146/100 N (rifled)
Roller shell OB 146/100 N (rifled)
Roller shell OB 146/100 P (perforated)
Roller shell OB 146/100 P (perforated)
Roller shell OB 146/55 K (oblique cutting)
Roller shell OB 146/55 N (rifled)
Roller shell OB 146/55 P (perforated)
Roller shell OB 146/80 K (oblique cutting)
Roller shell OB 146/80 K (oblique cutting)
Roller shell OB 146/80 N (rifled)
Roller shell OB 146/80 N (rifled)
Roller shell OB 146/80 P (perforated)
Roller shell OB 146/80 P (perforated)
Roller shell OB 149/55 K (oblique cutting)
Roller shell OB 149/55 N (rifled)
Roller shell OB 149/55 P (perforated)
Roller shell OB 149/72 N (rifled)
Roller shell OB 150/56 N (rifled)
Roller shell OB 157/56 N (rifled)
Roller shell OB 160/100 N (rifled)
Roller shell OB 180/120 K (oblique cutting)
Roller shell OB 180/120 N (rifled)
Roller shell OB 180/120 P (perforated)
Roller shell OB 180/120 rifled Z=57
Roller shell OB 180/120 rifled Z=88
Roller shell OB 180/80 K (oblique cutting)
Roller shell OB 180/80 N (rifled)
Roller shell OB 180/80 P (perforated)
Roller shell OB 184/120 N (rifled)
Roller shell OB 184/120 N (rifled)
Roller shell OB 184/120 P (perforated)
Roller shell OB 185/120 K (oblique cutting)
Roller shell OB 185/120 N (rifled)
Roller shell OB 185/120 P (perforated)
Roller shell OB 185/80 K (oblique cutting)
Roller shell OB 185/80 N (rifled)
Roller shell OB 185/80 P (perforated)
Roller shell OB 190/122 K (oblique cutting)
Hit
Roller shell OB 190/122 N (rifled)
Hit
Roller shell OB 190/122 P (perforated)
Hit
Roller shell OB 190/180 N (rifled)
Hit
Roller shell OB 190/80 K (oblique cutting)
Hit
Roller shell OB 190/80 P (perforated)
Hit
Roller shell OB 190/85 N (rifled)
Hit
Roller shell OB 190/85 P (perforated)
Hit
Roller shell OB 190/90 N (rifled)
Hit
Roller shell OB 192/122 N (rifled)
Roller shell OB 194/122 K (oblique cutting)
Roller shell OB 194/122 N (rifled)
Roller shell OB 194/122 N (rifled)
Roller shell OB 194/122 P (perforated)
Roller shell OB 194/80 K (oblique cutting)
Roller shell OB 194/80 N (rifled)
Roller shell OB 194/80 P (perforated)
Roller shell OB 195/122 N (rifled)
Roller shell OB 195/122 N (rifled)
Roller shell OB 195/122 P (perforated)
Roller shell OB 195/75 P (perforated)
Roller shell OB 195/80 N (rifled)
Roller shell OB 195/80 P (perforated)
Roller shell OB 195/85 N (rifled)
Roller shell OB 200/122 N (rifled)
Roller shell OB 200/122 K (oblique cutting)
Roller shell OB 200/122 P (perforated)
Roller shell OB 200/122 P (perforated)
Roller shell OB 200/50 N (rifled)
Roller shell OB 200/52 N (rifled)
Roller shell OB 200/52 N (rifled)
Roller shell OB 200/80 K (oblique cutting)
Roller shell OB 200/80 N (rifled)
Roller shell OB 200/80 P (perforated)
Roller shell OB 205/52 N (rifled)
Roller shell OB 205/52 N (rifled)
Roller shell OB 206/120 K (oblique cutting)
Roller shell OB 206/120 N (rifled)
Roller shell OB 206/120 N (rifled)
Roller shell OB 206/120 N (rifled) for Pellet mill BUHLER
Roller shell OB 206/120 P (perforated)
Hit
Roller shell OB 206/120 P (perforated)
Roller shell OB 206/120 P (perforated) for Pellet mill BUHLER
Hit
Roller shell OB 206/142 N (rifled)
Roller shell OB 206/142 N (rifled)
Roller shell OB 207/52 N (rifled)
Roller shell OB 207/52 N (rifled)
Roller shell OB 220/120 K (oblique cutting)
Roller shell OB 220/120 N (rifled)
Roller shell OB 220/120 P (perforated)
Roller shell OB 225/160 N (rifled)
Roller shell OB 225/160 P (perforated)
Roller shell OB 240/100 K (oblique cutting)
Roller shell OB 240/100 K (oblique cutting)
Roller shell OB 240/100 N (rifled)
Roller shell OB 240/100 N (rifled)
Roller shell OB 240/100 P (perforated)
Roller shell OB 240/100 P (perforated)
Roller shell OB 240/120 K (oblique cutting)
Roller shell OB 240/120 N (rifled)
Roller shell OB 240/120 P (perforated)
Roller shell OB 245/120 K (oblique cutting)
Roller shell OB 245/120 N (rifled)
Roller shell OB 245/120 P (perforated)
Roller shell OB 250/106 N (rifled)
Roller shell OB 250/106 P (perforated)
Roller shell OB 250/110 K (oblique cutting)
Roller shell OB 250/110 N (rifled)
Roller shell OB 250/110 P (perforated)
Roller shell OB 250/110 P (perforated)
Roller shell OB 250/120 N (rifled)
Roller shell OB 250/120 P (perforated)
Roller shell OB 250/142 N (rifled)
Roller shell OB 250/142 N (rifled)
Roller shell OB 250/142 P (perforated)
Roller shell OB 250/142 P (perforated)
Roller shell OB 250/182 N (rifled)
Roller shell OB 250/182 Р
Roller shell OB 250/80 K (oblique cutting)
Roller shell OB 257/110 K (oblique cutting)
Roller shell OB 257/144 N (rifled)
Roller shell OB 257/144 P (perforated)
Roller shell OB 257/80 K (oblique cutting)
Roller shell OB 298/181 N (rifled)
Roller shell OB 310/133 N (rifled)
Roller shell OB 310/134 K (oblique cutting)
Roller shell OB 310/134 N (rifled)
Roller shell OB 310/134 P (perforated)
Roller shell OB 310/154 K (oblique cutting)
Roller shell OB 310/154 P (perforated)
Roller shell OB 320/154 K (oblique cutting)
Roller shell OB 320/154 N (rifled)
Roller shell OB 320/154 P (perforated)
Roller shell OB 320/206 K (oblique cutting)
Roller shell OB 320/206 N (rifled)
Roller shell OB 320/206 P (perforated)
Roller shell OB 320/232 P (perforated)
Roller shell OB 360/260 N (rifled)
Roller shell OB 380/185 N (rifled)
Roller shell OB 384/125 N (rifled)
Roller shell OB 384/125,5 N (rifled)
Roller shell OB 385/125 N (rifled)
Roller shell OB 385/130 N (rifled)
Roller shell OB 385/186.5 N (rifled)
Roller shell OB 388/110 N (rifled)
Roller shell OB 388/110 P (perforated)
Roller shell OB 390/155 N (rifled)
Roller shell OB 390/155 N (rifled)
Roller shell OB 390/160 N (rifled)
Roller shell OB 390/195 N (rifled)
Roller shell OB 395/116 N (rifled)
Roller shell OB 400/134 N (rifled)
Roller shell OB 400/134 P (perforated)
Roller shell OB 490/260 N (rifled)
Roller shell OB 490/260 P (perforated)
Roller shell OB 490/260 P (perforated)
Roller shell OB 490/260 P (perforated)
Roller shell OB 490/310 P (perforated)
Rotary body GT- 500М.03.017
Scraper GT- 500.10.060-01
Scraper GT-500М.10.040-01
Scraper GT-630 DA.03.120 modernized
Scraper GT-630 DA.03.125 modernized
Slider bearing GT-500-М.03.020-01
Spline shaft
Stud GT-630DA.03.027 modernized
Stud-bolt GT-520
Stud-bolt GT-630
Toothed sleeve (to roller adjusting arm OGM-0,8.01.002)
Toothed sleeve (to roller adjusting arm OGM-1,5.03.202)
Washer GT-420.01.006Hit
Ролик SB 250/85 N (rifled)
At the present time the ICK Group’s machine building factory manufactures the equipment ТМ Grantech for pellets production (гpellet mill, straw chopper, hammer mill, cooler, screening machine) and the spare parts. The dies are produced for all pellet mills (GT (Grantech), OGM-1,5 and OGM-0,8, DG-1, B6-DGV, PG, Muench, Buehller,Salmatec, Sprout-Matador, CPM, Van Aarsen, Stolz, Progress etc.) for pelletizing sun flower husks and meal, mixed feed, saw dust, residues from woodworking and agricultural sector and other raw materials.
Depending on pellet mill type and the raw material to be pelletized the ring dies differ in outer and inner diameters, number of the holes, diameter of the holes (from 2,0 up to 10,0 and more than 10,0 mm), die width. All dies are subjected to the very strict control at all stages of production.
The standard dies with the increased resource of performance at the good prices are produced from the alloy or stainless steel, in vacuum tempered.
The dies available are shipped from the ICK Group’s machine building factory warehouse located at the address: Ukraine, Kiev region, pgt.Hrebenki.
The dies can be shipped by any carrier (or by customer’s pick up) from the warehouse and under the order according to the customer’s drawings or samples.
ICK Group supplies the dies for the pellet mills to Belarus, Moldova, Kazakhstan, Russia, Lithuania, Latvia, Slovakia, Bulgaria, Poland and other EU’s countries.
Way of payment: payment on account issued.
In order to precise the price of the dies for the pellet and to buy the die to pellet mill we kindly ask you to contact our managers by telephone numbers +38 (044) 451-02-32, +38 (093) 354-44-20 or send us your request with indication of your contact number at our e-mail: spares@ick.ua
Dies, rollers and other spare parts to pellet mills
